YZF R1 (2009-2014 ) HeliBars® TracStar”
HeliBars® TracStar™ replacement handlebars and risers for the Yamaha YZF-R1 (years 2009-2014 only).2” (50mm) Taller** 1” (25mm) Rearward** 1 1/4” (32mm) Wider** at 26 1/4” total width Reduced vibrations obtained using the supplied rubber bushing and replacement nut for the steering damper Wrist angle optimised for a significant improvement in comfort All original cables and hydraulic lines are retained and bar end weights are accepted
This product has not been tested on the YZF R1 LE.
HeliBars® TracStar” Handlebars
Fits Model/Years:1999-2002 R6 (Gen 1) 2003-2004 R6 (Gen 2) 2006-2007 R6S
Product Specifications:1 1/2” Taller than Stock* 1” More Rearward than Stock* 1/4” Wider than Stock*
*Measurement taken at end of grips.
YAMAHA YZF-R1 1998-2003
HELIBARS TRAC-STAR HANDLEBARS
HeliBars® Yamaha YZF R1 Replacement Handlebars:
1998-200341mm Taller* 25.4mm Rearward* 19mm Wider* Retains: stock cables and hydraulic lines
HeliBars TracStar handlebar risers for Yamaha YZF R1 2015-onwards
Note: TS09127-KA & TS09127-KA-1 are the same
Honda CBR600RR (2007-2012)
HeliBars® Honda CBR600RR handlebar and riser:1 3/4” taller 5/8” rear offset 3/4” wider at 25 3/4” (stock is 25”) Uses all stock cables and hydraulic lines Retains factory bar end damper weights Black Powder Coat Finish
CNC carved from a single 6061 extruded aluminum billet, our newest TracStarTM HeliBars allows optimal placement of controls in a cramped environment. Because there are no handlebar tube mounting clamps attached to the fork tube clamps, the master cylinders and switch gear can be mounted closer to the top triple clamp. This single feature optimizes bar angles, height and width changes.
Suzuki Hayabusa , 1999-2007
Daytona 675, 675R, 675SE (2006-2012) TracStar” HeliBars® Replacement Handlebars
HeliBars® TracStar” Triumph® Daytona® 675 handlebar riser clip-ons by Heli Modified, Inc. An innovative design with improved street comfort.
Heli Modified believes you should have your cake and eat it too because, “Performance shouldn’t be painful”“
Our design guru, Harry Eddy, has once again applied his 360° Design” approach to produce the first in a new line of one piece alloy HeliBars.
CNC carved from a single 6061 extruded aluminum billet, the new TracStar“clip-ons allow optimal placement of controls in a cramped environment. Because there are no handlebar tube mounting clamps attached to the fork tube clamps, the master cylinders and switch gear can be mounted closer to the top triple clamp. This single feature optimizes bar angles, height and width changes.
The first recipient of the new TracStar” HeliBars is Triumph’s® awesome new Daytona® 675.
“The 675 is a balancing act that will be hard to follow. It is the most compact and well balanced sport bike I’ve owned. The only thing this machine needs is my new taller, flatter and wider TracStar” bars.”42.5 mm (1 5/8”) taller at the damper end 25 mm (1”) wider at 27 inches One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights Billet reservoir mount included Retains all stock cables and hydraulic lines No modifications to install 45 minute installation time