HeliBars Tour Performance™ handlebar risers for Kawasaki Concours14 Gen2 (GTR1400 2011>)
BMW R1200RT Handlebar Risers
2005-2012
Install beneath your stock bars and raise them 1” (25mm) and move them towards the rider 1” (25mm)
All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation. Machined Aluminum
BMW F800ST Handlebar Risers, Pilot Model
with Power Socket and Ram-Mount Ball
HeliBars Tour Performance® Handlebar Risers for the BMW F800ST (all years).
The new HeliBars Tour Performance® risers positions the handlebars closer to the rider:
2.5” (64mm) Taller** 3.5” (89mm) Rearward** All original cables and hydraulic lines are retainedFeatures include:
Ram Ball for Mounting an aftermarket device ie: GPS, Satelite Radio, Cell Phone Holder Powerlet Outlet (this is a European/BMW style Outlet), Wiring Harness 150-0034 matches this itemThere are 2 versions of this product, the standard version (part HR05056 – which does not have a ram ball or power socket) and the pilot version (part HR05055 – which is supplied with a fitted Ram Mount ball and Euro style power socket).
HeliBars® Tour Performance” handlebar riser for BMW F800ST
Standard model without power socket and ram-mount ball
Product Description
HeliBars Tour Performance® Handlebar Risers for the BMW F800ST (all years).
The HeliBars Tour Performance® risers positions the handlebars closer to the rider:
2.5” (64mm) Taller** 3.5” (89mm) Rearward** All original cables and hydraulic lines are retained There are 2 versions of this product, the standard version (part HR05056 – which does not have a ram ball or power socket) and the pilot version (part HR05055 – which is supplied with a fitted Ram Mount ball and Euro style power socket).
BMW R/850R/R1100R/R1150RT/R1200RT Handlebar Risers
Description:
HeliBars® Tour Performance® BMW Handlebar Riser Adapters by HeliBars fits the following models:
R850R (1994-1996) R1100R (1995-1996) R1150RT (2001-2005) R1200RT (2005-2012)Install beneath your stock bars and raise them 1” (25mm) and move them towards the rider 1” (25mm)
All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation. Machined Aluminum
BMW R1200RS LC 2015> HELIBAR RISERS
HeliBars Tour Performance™ handlebar risers for BMW K1600GT / K1600GTL
Install beneath your stock bars and raise them 1/2” (12mm)** and move them towards the rider 1 3/4” (44mm)**
All original cables and hydraulic lines are retained Maintains stock hardware Designed with metal “skirts” to hide the stock top triple clamp mounting section Color matched to the stock silver to give it a seamless appearance**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
HeliBars Tour Performance™ handlebar risers for BMW R1200R LC
Product Description
HeliBars® Tour Performance™ Handlebar Riser Adapters for the BMW R1200R LC (years 2015 onwards)
Install beneath your stock bars and raise them 1” (25mm)** and move them towards the rider 1 1/4” (32mm)**
All original cables and hydraulic lines are retained Maintains stock hardware Metal “skirts” hide the stock top triple clamp mounting section Color matched to the stock silver to give it a seamless appearance Exceptional build quality backed by a 30 day money back satisfaction guarantee**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
HELIBAR Riser BMW K1600B BAGGER
HeliBars® Tour Performance™ handlebar risers for BMW R NineT Variations
HELIBAR RISERS BMW R1200GS & R1200GSA
HeliBars® handlebars riser for Triumph 800 / 800XR / 800XC / 1200XC
Product Description
HeliBars Tour Performance® Handlebar Relocation Adapter for the Triumph 800 / 800XR / 800XC / 800XCX / 800XCA / 1200XC / Explorer / ExplorerXC & other variants (fits all years for each listed model)
The new HeliBars Tour Performance® adapter positions the handlebars closer to the rider:
1 1/4” (32mm) Taller** 1 1/8” (29mm) Rearward** All original cables and hydraulic lines are retained Exceptional build quality backed by a 30 day money back satisfaction guarantee**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
HANDCRAFTED IN THE USA:
HeliBars® are designed for easy installation, in most cases retaining all original cables and hydraulic lines, and requiring little or no modification to your original equipment. They are made with pride by American Craftsmen and women, and are backed by a one year warranty on all materials and workmanship.
GREATER LONG DISTANCE COMFORT:
HeliBars® provides motorcyclists with better handling ergonomics and greater long distance comfort without distracting from riding excitement. HeliBars research & development engineers are riders like you, and they take meticulous care to address all of your handlebars’ deficiencies before they design the perfect fix for your bike. When you buy HeliBars®, you are benefiting from years of experience in riding comfort and performance!
HELIBARS CELEBRATING OVER 27 YEARS:
At HeliBars® the focus for over 27 years has been helping motorcyle riders find their elusive comfort zone for all day riding no matter what style of bike they have. So when you are done for the day, you can stop because you want to, not because you hurt – this is what HeliBars® offers you, comfort without compromise!
Can Am Spyder Handlebar Riser
(2008-2012)
Description:
The new HeliBar Roadster” Riser adapter offers:
1 inch increased handlebar height 4.5 inch rear offset to reduce reach to grips CNC machined from extruded 6061T6 aluminum Black Anodized – Retains all stock lines and cables Retains center Can Am Console – Retains original handlebar Included in the kit is a plug to fill the hole left by the ignition area Fits with the Corbin® after market fairingCan also be used with the BRP 1 inch riser
Dimension with the BRP riser are:
2 inches taller 5 inches rearward This application will not work with the Corbin® fairing Optional power accessory mount is available
Yamaha FJR1300 Handlebar Bridge (Riser), (2006-2013)
Our Tour Performance Handlebar Bridge for the 2006-2013 US & European Model FJR1300’s.
Since introducing the replacement triple clamp for the FJR we have heard from many users that wondered why we went with this design vs. a standard riser under the stock handlebars. The triple clamp afforded the rider a many benefits first there was the benefit of moving the bars closer to the rider (risers alone wouldn’t have accomplished this) second we narrowed the stock triple clamp to gain slack in lines and third we gave it a two pinch bolt design vs. the stock single. While the benefits were substantial we had many that didn’t want to change the triple clamp out due to the cost for installation and the price of the product. Recently, with the introduction of HST bars for other models we have had a clammoring for HST bars for the FJR. We brought the bike in house with the full intention of producing a set of HST (Horizon Sport Touring, multi adjustable bars.) However, upon close inspection and some design work we determined the cost to the end user would be too great. It would have required all new lines, wiring and the controls would have needed to be altered. So we came up with the next best thing. The HeliBars Tour Performance Handlebar Bridge.
Mounts directly under your stock handlebars and offers 3 adjustable locations. Whether you want a sport bike feel or the ultimate tour performance machine you will find your ideal “Comfort Zone.” Kit includes a hydraulic line extension to lengthen your brake line. All other lines remain stock. Riser is pre-drilled to accept a Ram Ball or other after market device (hole is 3/8” × 16 thread pitch.) Easy installation, in under 1.5 hours.
Most forward location:
1” taller than stock 1 1/2” rearward 3” wider than stock at 28 1/2” – greatly improves rider leverage.Middle location:
1” taller than stock 2 1/4” rearward 1 1/2” wider than stock at 27”Most rearward location:
1” taller than stock 3” rearward Stock width at 25 1/2”
HeliBars handlebars riser for Yamaha FJR1300 2006-onwards
HR09079 = Silver, HR09079-BA = Black (All images are of the silver version)
HeliBars Tour Performance Handlebar Relocation Adapter for the Yamaha Super Tenere (years 2012-2013)
HeliBars Tour Performance™ handlebar riser for Yamaha Tracer 900GT
MT09 TRACER
Moto Guzzi Handlebar Risers
(2006-2010)
Description:
The new Tour Performance STR Risers by HeliBars combines the best of Sport and Touring ergonomics. The STR Risers remounts the stock handlebar tubes and controls in the the most ideal position possible for both handling and comfort.
1 3/4” Taller 1 1/4” Rearward 1 3/4” Narrower Improved Angles Retains Stock Lines and CablesCNC machined from Solid Billet Aluminum. Non-ABS bikes may require a change in Brakeline.
BMW K1200GT (2005-2008), K1300GT (2009-2011)
Handlebar Riser
Description:
Ken is a motorcyclist residing in Maine and he took delivery of the first K1200 GT in the state (see Street Cycles’ website for more info). After several rides Ken came to the realization that his upcoming 2 month tour of the Rockies would require a change in ergonomics. “I need to get the bars closer to be really comfortable. My reach is a bit short.”
Ken called Harry at Heli Modified and made arrangements to deliver his machine for product development. Harry had been waiting to get his hands on the new GT and after a short ride it was clear how to tip the comfort scale. Several prototypes later and many hours of refinement finished, Heli Modified introduced the Tour Performance ® bar relocation adapter for the K1200GT. Also fits the K1300GT.
Product Specifications:
1” (25mm) Taller 1 3/8” (30mm) Rearward
HeliBarsTour Performance™ Replacement Triple Clamp and Risers for BMW RnineT Racer
Yamaha FJR1300 Handlebar Risers (2006-2013)
Fits HELI Triple Clamp Only!
Description:
Description:
While the Heli Triple Clamp is no longer in production we know there are many riders that have them installed. You can still order the riser to fit your Heli Triple Clamp.
HeliBars® Yamaha FJR1300 Handlebar Riser:
3/4 tallerAre you looking for a additional height out of your HeliBars Triple Clamp? Then this product is the perfect match with you, your bike and your HRT076 / HRT076-2 or HRT076ES / HRT076ES-2.
The optional accessory risers are designed to work only with the original HRT Triple Clamp (part # HRT076/HRT076-2 or HRT076ES/HRT076ES-2).
NOTE: THESE RISERS DO NOT WORK WITH THE STOCK TRIPLE CLAMP.
The optional accessory risers are designed to work only with the original HRT Triple Clamp (part # HRT076/HRT076-2 or HRT076ES/HRT076ES-2).
NOTE: THESE RISERS DO NOT WORK WITH THE STOCK TRIPLE CLAMP.
HeliBars® Horizon™ handlebar for BMW S1000XR 2015+
Honda ST1100 Multi Adjustable Handlebars 1991-1994 models
While everything is included in the kit, some members of the VFR boards have installed full replacement throttle cables in order to keep them in the stock location. This is NOT necessary, however if you prefer to not re-route your cables here are the part numbers they have referenced: 17910-MT3-000 Cable A and 17920-MT3-000 Cable B.
Installed on HeliBars development bike the ST1100 specs are:
Honda ST1300 Multi Adjustable Handlebars
(2003-2013)
Description:
Horizon ST Handlebars for the Honda ST1300!
Maximum 4” taller depending on forward or back orientation of riser. (2” Taller than our Gen 3 Riser) Maximum 5” rearward depending on forward or back orientation of riser and forward and back angle of the grip tube. (2.5” More rear offset than the Gen 3 Riser) Maximum 2” wider depending on forward or back wrist angle adjustment. Detailed instructions and all components necessary for installation are included.Description:
Horizon ST Handlebars for the Honda ST1300!
Maximum 4” taller depending on forward or back orientation of riser. (2” Taller than our Gen 3 Riser) Maximum 5” rearward depending on forward or back orientation of riser and forward and back angle of the grip tube. (2.5” More rear offset than the Gen 3 Riser) Maximum 2” wider depending on forward or back wrist angle adjustment. Includes line extensions. Detailed instructions for installation are included.Key Features:
Taller and more rearset than stock or any after market adapter. Wrist angle and reach adjustable for personalized fitment. 28 to 28 3/4” width depending on wrist angle adjustment. Width is 1.5 to 2 inches wider than stock 26 3/4” width. Ultimate touring comfort. No more wrist, shoulder, neck or back pains caused by reaching out of your comfort zone. Vastly improved handling especially at lower speeds.
Kawasaki GTR1400 C14 Multi Adjustable Handlebar Replacement System
(2008-2012)
Description:
For those who want more, the Horizon ST has to be seen and felt to be believed. It delivers an amazing level of comfort due to its height,set-back and wrist angle adjustability. The Patented* Horizon ST is like no other handlebar in the history of motorcycling. It adjusts to fit your grip.
SPECS:
Height: +2.5 to 4.5 inches depending on forward/backward adjustment Set-back: up to 6 inches depending on forward/backward wrist angle adjustment Width: 27 to 28.5 depending on forward/backward wrist angle adjustment Kit Includes: Handlebar mounting adapter which replaces the stock handlebars and bolts directly to the top triple clamp. Also included: Custom designed hydraulic line extensions. This allows the Horizon ST bar to work with the factory or aftermarket clutch and front brake hydraulic lines. Bar mounting tubes are drilled for control housings and factory or aftermarket damper weights are retained. Improved field of vision in rear view mirrors. Vastly improved low speed handling and freeway comfort. Comfort without Compromise!
BMW K1600GTL or K1600GT Horizon ST Replacement Handlebars
for models up to 2016
Description:
Introducing the much anticipated replacement handlebar system for the K1600GTL. We heard from riders in the field that ideally they wanted the same rear offset but adjustments for wrist angle and height. With the Horizon ST bars you can adjust it all!
Specifications:
0-2” Taller* 0-2” Rear Offset* All the stock lines and hydraulics remain unchanged and in the stock location Bar control locating holes are precision drilled for factory components and stock damper weights are retained Grip width has been increased 25mm (1”) @ 30 inches. 3pc handlebar mounting adapter comes standard with a centrally located threaded mounting hole on its top cover to accept a Ram Mount Ball Want a center cover power source check out the Optional Pilot Cover 1 to 1 1/2 hr install time. Every component required for installation is included.Optional Pilot Cover available = AC00406UN + Wiring Harness 150-0034
HeliBars® Horizon” XP2 multi adjustable handlebar system for Harley Davidson Road Glide 2015-onwards for 32mm bar models
Product Description
HeliBars® Horizon” XP2 Multi Adjustable Replacement Handlebar System for Harley Davidson Road Glide (2015 onwards) and other large Cruisers with a 1 1/4” (32mm) diameter handlebar
For 2015 Harley Davidson made significant changes to the stock handlebars on the Road Glide. Unfortunately, for most riders they didn’t address the poor wrist angle in the bars. Not to worry HeliBars to the rescue! Introducing HeliBars Horizon XP2 performance handlebar for the Road Glide with 1 1/4” knurled mounting clamps.
The shape of the Horizon XP / XP2 is visually recommended for larger cruisers which have a relatively open/uncluttered area around the bars (discrete clocks, etc.) and so lends itself nicely to the Harley Davidson Road Glide, Road King and others. Note that Road Glide models up to 2013 require the Horizon XP model as they have a 1” (25mm) diameter bar.
Horizon System Advantages:
HeliBars is the only handlebar manufacturer that offers patented 3 axis of adjustability for superior comfort. Made from DOM high strength tubing, investment cast 8620 alloy steel clamps and pivots CNC machined from Solid 6061 Billet Aluminum; HeliBars Horizon adjustable handlebars offer increased comfort and control while alleviating any concerns regarding safety. The patented design takes into account several safety features and bars are torqued into place using the highest quality hardware for maximum integrity.
Positioning adjustable in no less than 3 ways: Bars rotate up and down, forwards and backwards, inwards and outwards Grip wrist angle adjustable for ultimate fit and long-range comfort Brake and clutch lever angles adjustable for perfect reach Taller and more rearset than the manufacturer’s or any after market adapter Ultimate touring comfort. No more wrist, shoulder, neck or back pains caused by reaching out of your comfort zone Vastly improved leverage and handling especially at lower speeds Exceptional build quality American MadeXP2 Model Specifications:
Direct stock replacement for the 2015 Road Glide handlebar 2” to 4” inch (5 cm to 10 cm) rear-adjustable offset** 30” to 34.5” (76 cm to 87.5 cm) width** (grip end to grip end) – note that typical rider use is 31” to 32” wide (78.5 cm to 81 cm) 10” (25.5 cm) rise** Corrects the severe rearward wrist angle position of the stock bar Will maintain stock control clamps (pins will need to be removed) Knurling is 3.5” (9 cm) width – this is the distance between the center lines of the 2 knurled (cross hatched) sections which prevent bar slip/rotation Interior bend to bend width is 8” (20.5 cm) – this is the length of the straight central section of the bar before it bends on each side (the clamped section) 1 1/4” (32 mm) bar clamp diameter, 1” (25mm) diameter for the other parts of the bar Hand
HeliBars® Horizon” XP multi adjustable handlebar system for Harley Davidson Road Glide up to 2013
1” (25.4mm) bars
Product Description
HeliBars® Horizon” XP Multi Adjustable Replacement Handlebar System for Harley Davidson Road Glide – all years up to 2013 – with a 1” (25mm) diameter handlebar
The Horizon XP / XP2 models have a wider central section (the clamping area) than the Horizon Rebel models, making them suitable for use on the Road Glide bikes.
The shape of the Horizon XP / XP2 is visually recommended for larger cruisers which have a relatively open/uncluttered area around the bars (discrete clocks, etc.) and so lends itself nicely to the Harley Davidson Road Glide, Road King, Freewheeler Trike (pictured) and others. Note that the Road Glide model launched in 2015 requires the Horizon XP2 model as it has a 1 1/4” (32mm) diameter bar.
Horizon System Advantages:
HeliBars is the only handlebar manufacturer that offers patented 3 axis of adjustability for superior comfort. Made from DOM high strength tubing, investment cast 8620 alloy steel clamps and pivots CNC machined from Solid 6061 Billet Aluminum; HeliBars Horizon adjustable handlebars offer increased comfort and control while alleviating any concerns regarding safety . The patented design takes into account several safety features and bars are torqued into place using the highest quality hardware for maximum integrity.
Positioning adjustable in no less than 3 ways: Bars rotate up and down, forwards and backwards, inwards and outwards Grip wrist angle adjustable for ultimate fit and long-range comfort Brake and clutch lever angles adjustable for perfect reach Taller and more rearset than the manufacturer’s or any after market handlebar Ultimate touring comfort. No more wrist, shoulder, neck or back pains caused by reaching out of your comfort zone Vastly improved leverage and handling especially at lower speeds American madeP Model Specifications:
2” to 4” inch (5 cm to 10 cm) rear-adjustable offset** 30” to 34.5” (76 cm to 87.5 cm) width** (grip end to grip end) – note that typical rider use is 31” to 32” wide (78.5 cm to 81 cm) Knurling is 3.5” (9 cm) width – this is the distance between the center lines of the 2 knurled (cross hatched) sections which prevent bar slip/rotation Interior bend to bend width is 8” (20.5 cm) – this is the length of the straight central section of the bar before it bends on each side (the clamped section) 1” (25 mm) bar diameter Handlebar tubes are slotted for wiring, bars themselves are not internally wired due to pivot points Accommodates electronic throttle and Harley Davidson heated grips 2007 and earlier Harley Davidson models require a flexible brake line (not included**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
Horizon Rebel, Multi Adjustable Replacement Handlebar System
For over 30 years HeliBars has been producing replacement handlebars and risers for Sport Bikes & Sport Tourers making your ride more comfortable. In 2006 we expanded our market to cruisers with the increasingly popular, multi-adjustable, Horizon line.
The HZ700 with its sleek riser is by far our most popular Horizon Design.
Model Specifications:
2” to 6” inch rear-adjustable offset 31 width 1” lower mounting bar (if your bike has a 1 1/4” bar you will need to change out clamps.) 1” upper cross bar (great for mounting Clocks4Bikes clocks and thermometers) Accommodates Electronic Throttle 2007 and earlier models require a flexible brake line (not included) American MadeSuitable for the following motorcycles:
FLSTF Fat Boy FLSTN Softail Deluxe FLSTC Heritage Softail Classic FXST Softail Standard FXCWC Rocker C FXTSSE Screamin’ Eagle Softail Springer FXDB Dyna Street Bob FXDF Dyna Fat Bob FXDL Dyna Low Rider FXDWG Dyna Wide Glide (requires new brakeline for length.) FLHR Road King FLHRC Road King FLTR Road Glide FLHRSE Screamin Eagle Road King (requires replacement risers.)
Horizon Rebel, Multi Adjustable Replacement Handlebar System for Road Kings & Road Glides
HZ700SR-194
Description:
For those that prefer the more traditional styling of a tubular handlebar our “Rebel” fits the bill! All the same great features of our most popular Horizon product (HZ700) but with a classic look.
odel Specifications:
Suitable for the following motorcycles:
FLSTF Fat Boy FLSTN Softail Deluxe* FXSTB Softail Night Train* FLSTC Heritage Softail Classic FXST Softail Standard* FXCWC Rocker C FXTSSE Screamin’ Eagle Softail Springer FXDB Dyna Street Bob FXDF Dyna Fat Bob FXDL Dyna Low Rider FXDWG Dyna Wide Glide (requires new brakeline for length.) FLHR Road King FLHRC Road King FLTR Road Glide FLHRSE Screamin Eagle Road King (requires replacement risers.)
Honda GL1800/F6B LST Horizon Bars 2001-2015
Description:
The most comfortable handlebar design in the world is also the best performance upgrade for all GL1800/F6B front forks.
This is because the stock handlebars suffer from a high degree of flexing and to make matters worse, the left and right bars flex independently of each other. What is felt as a flexing fork is actually the handlebars flexing between the rider’s hands and their mounts on the top triple clamp.
LST Bars are:
Up to 2 1/2 inches taller than stock handlebars depending on adjustment combinations. Up to 4 inches closer to the rider than stock depending on adjustment combinations. Wrist angle adjusts over a 36 degree sweep forward and back with safety rotation limiters. No more cramped feeling when doing tight turns at low speed! All necessary components included for start to finish installation. Uses all factory cables, hydraulics and wire looms. 2-3 hour installation time for Wing-familiar mechanics. High strength alloy aluminum construction. One inch interconnecting cross bar provides an expansive area to mount gadgets. CNC machined on state of the art Mori Seiki machines. Durable UV resistant black powdercoat finish.
HeliBars Horizo LST multi-axis adjustable handlebars for Honda F6B / GL1800 Goldwing
Ram Mount Ball
The Ram-Mount ball fits the following models: HR01032 for the 2003-2008 Honda ST1300, HR9017 for the 2006-2008 BMW K1200 GT and 2009 K1300GT, HRT076-2/HRT076ES-2 for the 2006-2008 Yamaha FJR1300 and HR04019 2008-2009 Concours14.
Ball is 1” in Diameter 3/8” × 16 thread pitch
Ram® 6” Extension Arm
Description:
Double socket extension arm to be used in conjunction with 1” Ram Mount Ball. Places your GPS at an ideal height.
It can be used with the following products.
GSX1300R HAYABUSA (2008-onwards)
TracStar HeliBars for the Hayabusa
TracStar HeliBars( replacement handlebars and risers for the Suzuki GSX1300R Hayabusa (years 2008-onwards)
1 5/8” (41mm) Taller**
1/2” (12mm) Rearward**
1/2” (12mm) Wider Overall*
Wrist angle optimised for a significant improvement in comfort
CNC machined from solid 6061 billet aluminum
Durable UV resistant silver powdercoat
**Please note that these are the true measurements taken at the wrist position, not at the fixing point or fork or triple clamp, the shape and angles of the HeliBars product give the final result required and indicated in the product description.
GSXR 600 / 750 (2004-2005)
TracStar” HeliBars® Replacement Handlebars
TracStar” HeliBars® for Suzuki GSXR 600 and GSXR 750
Suzuki GSXR600/750 (2004-2005 ),
GSXR1000 (2005-2013)
Replacement TRACSTAR Handlebars – Silver
Suzuki GSXR600/750 (2004-2005 ),
GSXR1000 (2005-2013)
Replacement TRACSTAR Handlebars – Black
25mm more rearward stock 38mm wider than stock CNC carved from a single 6061 extruded aluminum billet One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights Retains all stock cables and hydraulic lines No modifications to install 45 minute installation time
Suzuki GSX-R600/750 (2006-2014)
HELIBARS TRACSTAR handlebars
Silver powdercoat finish
Description:
2” (50mm) taller** 1” (25mm) rearward** 1 1/4” wider at 26 1/4” total width** Wrist angle optimised for a significant improvement in comfort One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights All original cables and hydraulic lines are retained and bar end weights are accepted No modifications to install 45 minute installation time
Suzuki GSXR 600/750 (2006-2014)
HELIBARS Black powdercoat finish
Description:
2” taller than stock 1” more rearward stock 1 1/4” wider than stock CNC carved from a single 6061 extruded aluminum billet One piece seamless design As always, pre drilled for control housings. A true direct replacement design. Retains factory damper weights Retains all stock cables and hydraulic lines No modifications to install 45 minute installation time
Kawasaki ZX6R Replacement Handlebars
(2007-2008)
Heli Modified believes you should have your cake and eat it too because, Performance shouldnt be painful”.
Additional details:
TracStar” clip on HeliBars handlebars innovative design with improved street comfort.
Heli Modified believes you should have your cake and eat it too because, Performance should not be painful”.
Our design guru, Harry Eddy, has applied his 360º Design” approach to produce another in the line of HeliBars handlebars one piece alloy bars. CNC carved from a single 6061 extruded aluminum billet, the TracStar clip-ons allow optimal placement of controls in a cramped environment. Because there are no handlebar tube mounting clamps attached to the fork tube clamps, the master cylinders and switch gear can be mounted closer to the top triple clamp. This single feature optimizes bar angles, height and width changes.
2 (50mm) taller 1 (25mm) rear offset Stock width at 25 ½ One piece seemless design As always, pre drilled for control housings A true direct replacement design Retains factory damper weights Billet reservoir mount included Retains all stock cables, hydraulic lines No modifications to install Approximately 45 minutes to install
Kawasaki ZX10 Replacement Handlebars
(2006-2010)
HeliBars model specific approach has turned out yet another unique TracStar design, to increase rider comfort while retaining excellent handling characteristics and feedback.
2008-2010 Specifications HeliBars® Kawasaki ZX10 handlebar replacement system:
2006-2007 Specifications**
38mm taller 12.7mm rearward 654mm widthAll stock cables and hydraulics retained.