50/49mm GSXR 1000 ’01-04 Clipon Assembly
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12” long and are easily adjusted to whatever custom width you desire.
The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end and still be able to properly clamp the fork.
Note: 2003-2004 Models do not allow full lock steering to the right with stock steering stops due to the throttle cables contacting the ram air tube. Racers need to either 1) build up the steering stops, 2) rotate your throttle tube couterclockwise or 3) adapt 2004 GSXR 600/750 top exit throttle housing.
