2017-18 Yamaha FZ09 (MT09) Clip-On 1.5 Inch Riser w/Adapter Plate & Standard Black Bars
2017-18 Yamaha FZ09 (MT09) Clip-On 1.5 Inch Riser w/Adapter Plate & Standard Black Bars
37mm 1.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
41mm RISER CLIP-ONS 1½“Rise
43mm 1.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
45mm 1.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
48mm 1.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
Woodcraft Motorcycle Clip-ons for Honda CBR1000RR / CBR1000RR SP / CBR1000RR SP2 50mm Clamp, 7/8” Bar
52mm RISER CLIP-ONS 1½” Rise
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
53mm 1.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
DUCAT1 MONSTER 821/1200 1.5” RISER ADAPTER
Our new Monster 1200S adapter plate assembly comes complete with black handlebars and bolts directly to the stock handlebar mount. These billet pieces look fantastic and have many advantages over stock bars: lower your bars 1 to 3 inches, put your hands in a more natural position for sport riding, custom tailor the bar height for optimum comfort using different risers or flipping the adapter over, inexpensive replacement bars are available anywhere, don’t let a tip over ruin a track day.
Rise Guide
1 inch rise, up position – 2.25 inch drop over OEM
1 inch rise, down position – 3.25 inch drop over OEM
1.5” rise, up position -1.75” inch drop over OEM
1.5” rise, down position – 3.75 inch drop over OEM
We’ve had several riders use the adapter plate in the “up” position on the street and in the “down” position for a track day. Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.
NINJA 650
Kawasaki 650R, ’06-‘11 Clipon Adapter Plate w/ 2” Rise; Black Bars Included
Our new Kawasaki Ninja 650R adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
Our exclusive design will set your bike apart at the race track or your local bike night.
NOTE: The 1” and 1.5” risers are recommended for ’12-‘15 Ninja 650R models only. The higher rise will make contact w/the upper fairing.
Universal Reservoir Mount Bracket
This bar mounted bracket can be set up to hold the brake reservoir either parpendicular or parallel to the handlebar. It simply clamps on to the portion of the handlebar that sticks through the main clipon to make securing the reservoir a snap. Depending on the model of bike you may need to lengthen or shorten the brake hose to achieve the optimal length.
Brake Reservoir Bracket Suzuki GSXR600/750 to ’05, GSXR1000 to ’04
This bracket is a simple solution to mount your master cylinder bracket on a late model Suzuki. You simply remove the top triple clamp bolt and secure this bracket to the top clamp, giving you a solid place to bolt the reservoir. Sold with hardware to make the job complete.
Fits: 01-05 GSXR600
00-05 GSXR750
01-04 GSXR1000
Brake Reservoir Bracket 05+ GSXR1000, 06+ GSXR600/750
This bracket is a simple solution to mount your master cylinder bracket on a late model Suzuki. You simply remove the top triple clamp bolt and secure this bracket to the top clamp, giving you a solid place to bolt the reservoir. Sold with hardware to make the job complete. Note: These brackets do not work with clipons risers – if you use risers, select part number 12-3200
Fits:
06+ GSXR600
06+ GSXR750
05+ GSXR1000
Yamaha MT-09 / FZ09 ’14-16/XSR900 ’16 Clipon Riser Set 2” Rise Adapter Plate W/Standard Black Bars
Our new FZ09 (MT09) adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. The 1 inch riser setup can be run in either the “up” or “down” position.
Rise Guide
2 inch rise, up position – 1.75 inch drop over OEM
Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.
NOTE: The 2 inch riser setup should be run in the “up” position only.
Yamaha FZ09 (MT-09) ’17-18 Clipon Riser Set 2 Inch W/Adapter Plate, Bracket, W/Standard Black Bars
37mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
41mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
43mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
45mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
48mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
51mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
52mm RISER CLIP-ONS 2” Rise
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
53mm 2” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
Yamaha FZ09 ’14-17,XSR900 ’16+ Front Mount 35mm Eccentric Adjustable Adapter Plate Assembly
Yamaha MT09 2018-21 Front Mount 35mm Eccentric Adjustable Adapter Plate Assembly
NINJA 650
Kawasaki 650R, ’06-‘11 Clipon Adapter Plate w/ 2-1/2” Rise; Black Bars Included
Our new Kawasaki Ninja 650R adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
Our exclusive design will set your bike apart at the race track or your local bike night.
NOTE: The 1” and 1.5” risers are recommended for ’12-‘15 Ninja 650R models only. The higher rise will make contact w/the upper fairing.
Kawasaki Ninja 250 08-12 and Ninja 300 13+ Riser Clip-on Assembly with 2-1/2 inch rise
Woodcraft is proud to present our Ninja 300 clipons. We worked hard to develop a set of clip-ons to fit this bike perfectly. A simple re-positioning of the brake line is necessary on this model. The instructions, including a photo, require no cutting or permanent removal of parts. The Ninja 300 clip-ons feature a 2 1/2” riser that eliminates interference issues with the bodywork and fuel tank, while getting the bars as low as possible.
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar. Comes with Bars
IMPORTANT NOTE: The front brakes must be bled after the brake line has been re-positioned to ensure that there is no air in the brake line.
Kawasaki Nina 400 2018 41mm Riser Clipon Assembly with 2-1/2” Rise, Black Bars
43mm 2.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
45mm 2.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
48mm 2.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
50mm 2.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
51mm 2.5” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
52mm RISER CLIP-ONS 2½”
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 2.5 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304