NINJA 650 2006+ CLIP-ONS
Come with handlebar tubes (not shown in picture).
Note: these are designed for race track use and will have clearance problems with the stock bodywork
NINJA 650 2006+ CLIP-ONS
Come with handlebar tubes (not shown in picture).
Note: these are designed for race track use and will have clearance problems with the stock bodywork
3 Piece Split Clip-on Assembly (43mm)
Woodcraft 3-piece split clip-ons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clip-ons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (45mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (46mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
WOODCRAFT CLIP-ON SET
CBR600RR 2005-2006
3 Piece Split Clip-on Assembly (48mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (51mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (52mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (53mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
3 Piece Split Clip-on Assembly (54mm)
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
All kits include 12” bars that are easily adjustable to whatever width you desire.
50/49mm GSXR 1000 ’01-04 Clipon Assembly
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12” long and are easily adjusted to whatever custom width you desire.
The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end and still be able to properly clamp the fork.
Note: 2003-2004 Models do not allow full lock steering to the right with stock steering stops due to the throttle cables contacting the ram air tube. Racers need to either 1) build up the steering stops, 2) rotate your throttle tube couterclockwise or 3) adapt 2004 GSXR 600/750 top exit throttle housing.
3 Piece Split Clip-on Assembly (52mm) TZ250
Woodcraft 3-piece split clipons are specially designed to make installation and removal a snap. Our 3-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible.
These TZ250-specific clip-ons have a drop of 15 degrees to suit the TZ250 riding stance.
All kits include 12” bars that are easily adjustable to whatever width you desire.
50/48mm Clipon Assembly, GSXR600/750 ’06-10
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end. Special attention has also been taken to save weight wherever possible. The bars are 12” long and are easily adjusted to whatever custom width you desire.
The forks on these bikes taper just below the triple clamp to a smaller diameter, leaving traditional 50mm clipons with a clamping area that is not wide enough to grab the entire clipon. Unlike standard 50mm clipons, our stepped GSXR clipons allow you keep stock ride height or to lower your front end on the 06+ GSXR600/750 and still be able to properly clamp the fork.
These clipons are sold in pairs and include both handlebars. For the GSXR’s, we recommend the 12-3245 reservoir mounting bracket with the purchase of these clipons.
Yamaha ’15-18 R3 41mm Clipon Assembly
10mm Clipon Riser Spacer Set
FORK TUBE CLAMP FOR HANDLEBAR RISER, 52mm
FORK TUBE CLAMP FOR HANDLEBAR RISER, 54mm
Ducati Panigale 53mm Clip-ons with Damper Bracket and Extra Long Black Bars
NINJA 650
Kawasaki 650R, ’06-15 Clip-on Adapter Plate w/ 1inch Rise; Black Bars Included
Our new Kawasaki Ninja 650R adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
Our exclusive design will set your bike apart at the race track or your local bike night.
NOTE: The 1” and 1.5” risers are recommended for ’12-‘15 Ninja 650R models only. The higher rise will make contact w/the upper fairing.
Yamaha FZ07 (MT-07) ’15 Clipon Adapter Plate 1 inch Riser Set w/Standard Black Bars
Multi-position
Our new FZ07 (MT07) adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the “up” or “down” position.
Rise Guide
1 inch rise, up position – 2.75 inch drop over OEM
1 inch rise, down position – 3.75 inch drop over OEM
1.5 inch rise, up position – 2.25 inch drop over OEM
1.5 inch rise, down position – 4.25 inch drop over OEM
Yamaha MT-09 / FZ09 ’14-16/XSR900 ’16 Clipon Riser Set 1inch Rise Adapter Plate W/Standard Black Bars
Our new FZ09/MT09 adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. The 1 inch riser setup can be run in either the “up” or “down” position.
Rise Guide
1 inch rise, up position – 2.75 inch drop over OEM
1 inch rise, down position – 3.75 inch drop over OEM
We’ve had several riders use the adapter plate in the “up” position on the street and in the “down” position for a track day. Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.
IMPORTANT NOTE: If going to be used in the drop position a 10mm Riser Spacer Kit (Part number 12-0409SP-10B) is required for proper tank clearance
2018-23 Yamaha FZ09 (MT-09) Clip-On 1 Inch Riser w/Adapter Plate & Standard Black Bars
2022-23 XSR900
Honda CBR250R Risers
Woodcraft’s new Honda CBR250R riser clip-ons lower the handlebars 1.5” over the stock clip-ons (measured at end of the bar) . They provide a more aggressive riding position without interfering with the bodywork. Perfect for anyone racing or just looking for a sportier ride on their CBR250R.
IMPORTANT NOTE: Although we may show nil stock of this assembly, we make up the sets from individual components so can usually supply from stock. Email imports@mickhone.com.au to confirm stock or ring (03)98900304
WOODCRAFT Riser Clip-Ons
43mm 1” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
45mm 1” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
WOODCRAFT RISER CLIP-ONS for YZF-R3
48mm 1” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
51mm 1” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
52mm RISER CLIP-ONS 1” Rise
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
53mm 1” RISER CLIP-ONS
Woodcraft 2-piece split clipons are specially designed to make installation and removal a snap. Our 2-piece design is race proven and makes it easy to service your clipons below the triple clamp without having to disassemble the entire front end.
Special attention has also been taken to save weight wherever possible on these clamps. The bars themselves are 12 long and are easily adjusted to whatever custom width you desire. Racers no longer have to worry about replacing an expensive complete clipon assembly after a crash – these risers use an inexpensive universal handlebar.
These clipons have a 1 inch rise over a conventional race clipon with zero rise, not a rise over your stock clip-ons. This clipon will give you the ability to have a race style clipon assembly with the option to get the bars up higher for rider comfort.
Please note that you will need to assess your motorcycle for both handlebar clearance and available cable/brake line length. This is a universal unit that is not model specific. Some additional work may be required for fitment.
IMPORTANT NOTE: ALTHOUGH WE MAY SHOW NIL STOCK OF THIS ASSEMBLY, WE MAKE UP THE SETS FROM INDIVIDUAL COMPONENTS SO CAN USUALLY SUPPLY FROM STOCK. EMAIL IMPORTS@MICKHONE.COM.AU TO CONFIRM STOCK OR RING (03)98900304
12-1590-10B Offset Clipon Riser Set – 1 inch
Replacement bolt set
for Woodcraft Riser Clip-Ons
Replacement bolt set
for Woodcraft Riser Clip-Ons
Ducati Monster 1200 1 Inch Clipon Riser Adapter Plate w/Standard Black Bars
Our new Monster 1200S adapter plate assembly comes complete with black handlebars and bolts directly to the stock handlebar mount. These billet pieces look fantastic and have many advantages over stock bars: lower your bars 1 to 3 inches, put your hands in a more natural position for sport riding, custom tailor the bar height for optimum comfort using different risers or flipping the adapter over, inexpensive replacement bars are available anywhere, don’t let a tip over ruin a track day.
Rise Guide
1 inch rise, up position – 2.25 inch drop over OEM
1 inch rise, down position – 3.25 inch drop over OEM
1.5” rise, up position -1.75” inch drop over OEM
1.5” rise, down position – 3.75 inch drop over OEM
We’ve had several riders use the adapter plate in the “up” position on the street and in the “down” position for a track day. Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.
Ducati Monster 696/796/1100 RISER HANDLEBAR SET W/Adapter Plate and Long Black Bars
Our new Monster adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
Our exclusive design will set your bike apart at the race track or your local bike night.
1” Riser Shown 12-1660 comes with 1” risers; can use other height risers.
Handlebar angle is more comfortable than standard. Bars are extra long, part # 13-4105
NINJA 650
Kawasaki 650R, ’06-15 Clipon Adapter Plate w/ 1-1/2” Rise; Black Bars Included
Our new Kawasaki Ninja 650R adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash.
Our exclusive design will set your bike apart at the race track or your local bike night.
NOTE: The 1” and 1.5” risers are recommended for ’12-‘15 Ninja 650R models only. The higher rise will make contact w/the upper fairing.
Yamaha FZ07 (MT-07) ’15 Clipon Adapter Plate 1.5 inch Riser Set
w/Standard Black Bars
Our new FZ07 (MT07) adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. Both the 1 inch and 1.5 inch riser setups can be run in either the “up” or “down” position.
Rise Guide
1 inch rise, up position – 2.75 inch drop over OEM
1 inch rise, down position – 3.75 inch drop over OEM
1.5 inch rise, up position – 2.25 inch drop over OEM
1.5 inch rise, down position – 4.25 inch drop over OEM
Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars
Yamaha MT-09 / FZ09 ’14-16/XSR900 ’16 Clipon Riser Set 1-1/2” Rise Adapter Plate W/Standard Black Bars
Our new FZ09 (MT09) adapter plate bolts directly to the stock handlebar mount keeping all of the stock clearances, while putting your hands in a more natural position. You now have the option to flip your adapter plate upside down, which results in a more aggressive riding position that improves both traction and feel. This setup allows the use of multiple risers giving you the ability to custom tailor the bar height for optimum comfort.
Each plate is machined from tough billet aluminum giving your bike a custom look while making them much stronger than the stock handlebars. The handlebar tubes are kept as separate pieces allowing for inexpensive replacement in the event of a crash. The 1.5 inch inch riser setup can only be run in “up” position.
Rise Guide
1.5 inch rise, up position – 2.25inch drop over OEM
We’ve had several riders use the adapter plate in the “up” position on the street and in the “down” position for a track day. Our exclusive design will set your bike apart at the race track or your local bike night. This kit comes standard with black handlebars.